ShIP to

Home  > PRODUCT  > CCTV Power Supply  >  15V 60W Access Control Power Supply Box Support
15V 60W Access Control Power Supply Box Support

15V 60W Access Control Power Supply Box Support

MOQ
1pcs(small quantity is acceptable)
Place of Origin
Shenzhen, China
Payment Terms
L/C, T/T, Westernunion, Paypal, Cash
Delivery Time
7-30 working days depends on quantity
OEM/ODM Availability
YES
Certification
CCC/FCC/RoHS/CE
Warranty
3 years
Start Port
ShenZhen

CCTV Power Supply

Access control power supply

Meets EMC requirements and LVD certification requirements. Suitable for global voltage input and lightning protection design. Foot power, overcurrent and overvoltage protection power supply. Delayed unlocking, suitable for NC NO door locks. The access control host is unlocked. The building intercom extension power supply. 88% conversion efficiency, output ripple 100MV. Energy saving, no interference. With battery charging and backup power supply. The access control power supply adopts constant current and constant voltage charging mode, and has battery discharge and charging protection. All capacitors use high frequency, low resistance, long life electrolytic capacitors.

Product Display

36W
MODELAD-S1230AAAD-S1820AAAD-S1215AA
OutputDC Voltage12V18V24V
Rated Current3A2A1.5A
Current Range(Note 6)0~3A0~2A0~1.5A
Rated Power(Note 5)36W36W36W
Ripple & Noise Max(Note2)75mVp-p100mVp-p120mVp-p
Voltage Adj. Range±10%±10%±10%
Voltage Tolerance(Note 3)±7%±6%±5%
Line Regulatoin(Note 4)±0.5%±1%±1%
Load Regulation±1.0%±1.0%±1.0%
Setup/Rise Time50~300ms50~300ms50~300ms
Hold up time(Typ.)50~300ms50~300ms50~300ms
InputVoltage Range110~240VAC,125-373VDC (Withstand 300VAC surge input 5 second, No damage)
Frequency Range50/60Hz
Efficiency(Typ.)85%
85%
85%
Ac Current(Typ.)1.4A/110VAC  0.7A/220VAC
Inrush Current(Typ.)Cold Start: 40A/240VAC
Leakage Current(Typ.)< 2mA/240VAC
ProtectionOver load105%~150%
Protection type: Hiccup mode,recovers automatically after fault condition is removed
Over Voltage115%~150%
Protection type: Hiccup mode,recovers automatically after fault condition is removed
EnvironmentWorking Temp-10℃~60℃
Working Humidity20~90%RH, non-condensing
Storage Temp/Humidity-20℃~75℃  10~98%RH, non-condensing
Temp. Coefficiency±0.03%/℃(0~50℃)(+5V)
Vibration10Min/1 cycle,period for 60min,each along X,Y,Z axes
Safety & EMC(Note 7)Safety StandardsGB4943, EN60950
Withstand VoltageI/P-O/P: 1.5KVAC , O/P-FG: 1.5KVAC
Isolation ResistanceI/P-O/P 2KVAC/1min,I/P-FG 2KVAC/1min, O/P-FG 1KVAC/1min
EMI Conduction RadiationCompliance to: EN55022, EN61000-3-2,3,FCC part15,GB9254 class B,GB17625.1
EMS ImmunityCompliance to: EN61000-4-2,3,4,5,6,8,11,light industry level, criteria A
OthersMBTF≥100000h.
Dimension/Packing182*80*74mm(L*W*H)/ 1.5KG;24pcs/36Kg
Note1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor
3.Tolerance: includes set up tolerance, line regulation and load regulation
4.Line regulation is measured from low line to high line at rated load.
5.Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load.
6.Each output can work within current range. But total output power can&#8217;t exceed rated output power
7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that is still meets EMC directives.
8.Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time


60W
MODELAD-S1250AAAD-S1830AAAD-S1225AA
OutputDC Voltage12V18V24V
Rated Current5A3A2.5A
Current Range(Note 6)0~5A0~3A0~2.5A
Charging Voltage13.5V20.2V27V
Charge Current0-0.5A0-0.3A0.0.23A
Rated Power(Note 5)60W60W60W
Ripple & Noise Max(Note2)75mVp-p100mVp-p120mVp-p
Voltage Adj. Range±10%±10%±10%
Voltage Tolerance(Note 3)±7%±6%±5%
Line Regulatoin(Note 3)±0.5%±1%±1%
Load Regulation±1.0%±1.0%±1.0%
Setup/Rise Time50~300ms50~300ms50~300ms
Hold up time(Typ.)50~300ms50~300ms50~300ms


MODELMJ-60A
OutputDC Voltage13.8V21V30V
Rated Current6A5A3A
Current Range(Note 6)0~6A0~5A0~3A
Charging Voltage13.8V21V/
Charge Current0~1A0~1A/
Over Voltage10.5V15V/
Rated Power72W90W90W
Ripple & Noise Max(Note2)100mVp-p100mVp-p120mVp-p
Voltage Adj. Range±10%±10%±10%
Voltage Tolerance(Note 3)±5%±5%±5%
Line Regulation(Note 4)±1%±1%±1%
Load Regulation(Note 5)±1%±1%±1%
Efficiency(Typ.)80%85%82%
Setup/Rise Time500ms, 30ms/220VAC
Hold up time(Typ.)30ms/220VAC


MODELMJ-60B
OutputDC VoltageV1V2V3
13.8V1213.8
Rated Current5A1A1A
Current Range(Note 6)0~5A0~1A0~1A
Charging Voltage//13.8
Charge Current//1A
Over Voltage//10.5V
Rated Power69W12W/
Ripple & Noise Max(Note2)120mVp-p
Voltage Adj. Range±10%
Voltage Tolerance(Note 3)±5%
Line Regulation Note 4)±1%
Load Regulation(Note 5)±1%
Efficiency(Typ.)85%
Setup/Rise Time500ms,30ms/220VAC
Hold up time(Typ.)30ms/220VAC

Product Message

Ask for free custom survice now!

Related Products

______

Chat Online 编辑模式下无法使用
Chat Online inputting...