ShIP to

Home  >  Top PRODUCT Wholesale  >  Din-rail power supply Manufacturer  > 

dc din-rail power supply power dc Sanyi

dc din-rail power supply power dc Sanyi

Dc din-rail power supply power dc Sanyi

MOQ
1pcs(small quantity is acceptable)
Place of Origin
Shenzhen, China
Payment Terms
L/C, T/T, Westernunion, Paypal, Cash
Delivery Time
7-30 working days depends on quantity
OEM/ODM Availability
YES
Certification
CCC/FCC/RoHS/CE
Warranty
3 years
Start Port
ShenZhen
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:

MODELDR-30-5VDR-30-12VDR-30-15VDR-30-24V

OutputDC Voltage5V12V15V24V

Rated Current5A2.5A2A1.5A

Current Range0~5A0~2.5A0~2A0~1.5A

Rated Power25W30W30W36W

Ripple & Noise Max(Note2)80mVp-p120mVp-p120mVp-p120mVp-p

Voltage Adj. Range±15%±15%±15%±15%

Voltage Tolerance(Note 3)±2%±1%±1%±1%

Line Regulation(Note 4)±0.5%±0.5%±1%±1%

Load Regulation(Note 5)±2.0%±1%±1%±1%

Setup/Rise Time1000ms,30ms/220Vac(Full load)
Hold up time(Typ.)100ms/220Vac
InputVoltage Range100~240VAC
Frequency Range50/60Hz
Efficiency(Typ.)83%86%87%89%

Ac Current(Typ.)0.5A/100Vac   0.2A/240Vac
Inrush Current(Typ.)Cold Start: 10A/220Vac
Leakage Current(Typ.) 0.4mA
ProtectionOver load protection110%~120%

Protection type: Hiccup mode,recovers automatically after fault condition is removed
Over Voltage protection110%~120%

Protection type: Hiccup mode,recovers automatically after fault condition is removed
Over-temperature protectionProtected Mode: crystal internal contact temperature exceeds 140 ℃, turn off the output, when the temperature returns to normal automatic recovery
EnvironmentWorking Temp-10℃~60℃(Refer to "derating curve ")
Working Humidity20~90%RH, non-condensing
Storage Temp/Humidity-30℃~75℃  10~98%RH, non-condensing
Temp Coefficient±0.03% ℃(0~50℃)(+5V)
Vibration10Min/1 cycle,period for 60min,each along X,Y,Z axes
Safety & EMC (Note 7)Safety Standards Note 6GB4943, EN60950
Withstand VoltageI/P-O/P: 3KVAC   I/P-FG: 1.5KVAC O/P-FG: 1.5KVAC
Isolation ResistanceI/P-O/P I/P-FG O/P-FG: 100M Ohms/500VDC/25℃/70%RH
EMI Conduction RadiationCompliance to: EN55022, EN61000-3-2,3. FCC part15, GB9254 class B, GB17625.1
EMS ImmunityCompliance to: EN61000-4-2,3,4,5,6,8,11,light industry level, criteria A
OthersMBTF≥100000h.
DimensionPacking88×37×59 mm(L*W*H) /0.11KG;100pcs/11Kg
Note1.All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25℃ of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.Line regulation is measured from low line to high line at rated load.
5.Load regulation measurement: from 0% to rated load of 100%.
6.In accordance with the requirements of GB4943.1 power applies only to an altitude of 2000 meters in the following areas and non-tropical climate conditions for safe use.
7.The power supply is considered part of the system components, to be with terminal equipment related to electromagnetic compatibility Relevant confirmation.

Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...