switching power supply 12v | Switching Power Supply

Product Display

Product Specification

SP-36W
MODEL		AD-S0570AD	AD-S0940AD	AD-S1230AD	AD-S1524AD	AD-S2415AD	AD-S48075AD
Output	DC Voltage	5V	9V	12V	15V	24V	48V
	Rated Current	7A	4A	3A	2.4A	1.5A	0.75A
	Current Range	0～7A	0～4A	0～3A	0～2.4A	0～1.5A	0～0.75A
	Rated Power	35W	36W	36W	36W	36W	36W
	Ripple & Noise Max(Note2)	120mVp-p	120mVp-p	120mVp-p	120mVp-p	120mVp-p	120mVp-p
	Voltage Adj. Range	±10%	±10%	±10%	±10%	±10%	±10%
	Voltage Tolerance(Note 3)	±7%	±7%	±6%	±5%	±5%	±5%
	Line Regulation(Note 4)	±0.5%	±0.5%	±1%	±1%	±1%	±1%
	Load Regulation(Note 5)	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
	Setup/Rise Time	500ms, 30ms/220Vac (Full load)
	Hold up time(Typ.)	100ms/220Vac (Full load)
Input	Voltage Range	100～240Vac
	Frequency Range	50/60Hz
	Efficiency(Typ.)	83%	82%	85%	82%	82%	80%
	Ac Current(Typ.)	0.32A/220Vac
	Inrush Current(Typ.)	Cold Start: 50A/220Vac
	Leakage Current(Typ.)	3mA
Protection	Over load protection	110%～135%
		Protection type: Hiccup mode，recovers automatically after fault condition is removed
	Over Voltage protection	115%～150%
		Protection type: Hiccup mode，recovers automatically after fault condition is removed
	Over-temperature protection	Protected Mode: crystal internal contact temperature exceeds 140 ℃, turn off the output, when the temperature returns to normal automatic recovery
Environment	Working Temp	-10℃～60℃(Refer to "derating curve ")
	Working Humidity	20～90%RH, non-condensing
	Storage Temp/Humidity	-30℃～75℃ 10～98%RH, non-condensing
	Temp Coefficient	±0.03% ℃(0～50℃)(+5V)
	Vibration	10Min/1 cycle，period for 60min,each along X,Y,Z axes
Safety & EMC (Note 7)	Safety Standards Note 6	GB4943, EN60950
	Withstand Voltage	I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 1.5KVAC
	Isolation Resistance	I/P-O/P I/P-FG O/P-FG: 100M Ohms/500VDC/25℃/70%RH
	EMI Conduction Radiation	Compliance to: EN55022, EN61000-3-2,3. FCC part15, GB9254 class B, GB17625.1
	EMS Immunity	Compliance to: EN61000-4-2,3,4,5,6,8,11,light industry level, criteria A
Others	MBTF	≥100000h.
Others	DimensionPacking	110783m(LWH) /0.25KG;100pcs/25Kg
Note	1.All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25℃ of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.Line regulation is measured from low line to high line at rated load. 5.Load regulation measurement: from 0% to rated load of 100%. 6.In accordance with the requirements of GB4943.1 power applies only to an altitude of 2000 meters in the following areas and non-tropical climate conditions for safe use. 7.The power supply is considered part of the system components, to be with terminal equipment related to electromagnetic compatibility Relevant confirmation.

SP-48W
MODEL		AD-S05100AD	AD-S0955AD	AD-S1240AA	AD-S1532AD	AD-S2420AD	AD-S48075AD
Output	DC Voltage	5V	9V	12V	15V	24V	48V
	Rated Current	8A	5.5A	4A	3.2A	2A	1A
	Current Range	0～8A	0～5.5A	0～4A	0～3.2A	0～2A	0～1A
	Rated Power	40W	49.5W	48W	48W	48W	48W
	Ripple & Noise Max(Note2)	120mVp-p	120mVp-p	120mVp-p	120mVp-p	120mVp-p	120mVp-p
	Voltage Adj. Range	±10%	±10%	±10%	±10%	±10%	±10%
	Voltage Tolerance(Note 3)	±7%	±7%	±6%	±5%	±5%	±5%
	Line Regulation(Note 4)	±0.5%	±0.5%	±1%	±1%	±1%	±1%
	Load Regulation(Note 5)	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
	Setup/Rise Time	500ms, 100ms/220Vac (Full load)
	Hold up time(Typ.)	200ms/220Vac (Full load)

SP-60W
MODEL		AD-S05100AD	AD-S0970AD	AD-S1250AD	AD-S1540AD	AD-S2420AD	AD-S48125AD
Output	DC Voltage	5V	9V	12V	15V	24V	48V
	Rated Current	10A	7A	5A	4A	2.5A	1.25A
	Current Range	0～10A	0～7A	0～5A	0～4A	0～2.5A	0～1.25A
	Rated Power	50W	63W	60W	60W	60W	60W
	Ripple & Noise Max(Note2)	120mVp-p	120mVp-p	120mVp-p	120mVp-p	120mVp-p	120mVp-p
	Voltage Adj. Range	±10%	±10%	±10%	±10%	±10%	±10%
	Voltage Tolerance(Note 3)	±7%	±7%	±6%	±5%	±5%	±5%
	Line Regulation(Note 4)	±0.5%	±0.5%	±1%	±1%	±1%	±1%
	Load Regulation(Note 5)	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
	Setup/Rise Time	500ms，30ms/220Vac (Full load)
	Hold up time(Typ.)	100ms/220Vac (Full load)

SP-72W
MODEL		AD-S05120AD	AD-S0980AD	AD-S1260AD	AD-S1548AD	AD-S2430AD	AD-S4815AD
Output	DC Voltage	5V	9V	12V	15V	24V	48V
	Rated Current	12A	8A	6A	4.8A	3A	1.5A
	Current Range	0～12A	0～8A	0～5A	0～4.8A	0～3A	0～1.5A
	Rated Power	60W	72W	72W	72W	72W	72W
	Ripple & Noise Max(Note2)	120mVp-p	120mVp-p	120mVp-p	120mVp-p	120mVp-p	120mVp-p
	Voltage Adj. Range	±10%	±10%	±10%	±10%	±10%	±10%
	Voltage Tolerance(Note 3)	±7%	±7%	±6%	±5%	±5%	±5%
	Line Regulation(Note 4)	±0.5%	±0.5%	±1%	±1%	±1%	±1%
	Load Regulation(Note 5)	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
	Setup/Rise Time	100ms, 100ms/220Vac (Full load)
	Hold up time(Typ.)	200ms/220Vac (Full load)