Congratulations to Sanyi Technology as

Low-power power supplies are widely used in the electrical and electronic industry. In the process of application, some power failures, such as poor start-up, low output voltage, and overheating of the module, often occur. problem? This article will be announced for you.

In order to further improve the fire protection awareness of all employees of our company, all employees are aware of the duties and tasks of the relevant personnel during the fire, and how to evacuate and emergency escape and self-rescue, so as to achieve disasters and disaster relief, so in June 2019. On the 12th, the "Second Quarter 2019 Fire Evacuation Exercise" was held. The exercise was carried out in strict accordance with the regulations of the Fire Bureau and the “Fire Evacuation Exercise Plan” prepared by our company in advance, and it was a complete success. Through the fire drill here, we provided an emergency evacuation simulation training for our staff. To familiarize emergency personnel with necessary emergency operations, the employees' awareness of prevention and emergency escape and self-rescue capabilities have been further enhanced, providing valuable experience assurance for real emergency response actions.

The principle of choosing a power adapter 1. The maximum output current of the adapter shall be consistent with the maximum current required by the notebook as far as possible; if it is different, it shall be equal to or greater than the current required by the notebook;Note: as long as the current is large, you do not have to worry about how big, no matter how big you are, you do not have to worry about burning the machine!However, the current should not be too small, because unstable conditions such as screen flicker may occur.For example, the adapter of IBM T30 (16V, 4.5a) can be used on IBM ThinkPad T20 (16V, 3.36a) or ThinkPad X31 (16V, 3.5a).Here's how it works: the power adapter adjusts the output current according to the load, not the same.

Electromagnetic Compatibility EMC test (test) is the full name of company Magnetic Compatibility, defined as

New product Listing-Din-rail power supply！！！

SMT（Surface Mounted Technology）, is the most popular Technology in electronic assembly industry.The purpose is to put the SMT components in the appropriate position accurately, and then use the red glue and solder paste coated in advance to stick, and then through the reflow welding furnace, you can fix the SMT components on the PCB board, is to achieve high speed, high precision placement components equipment.

A: Pay via T/T, Western Union, Paypal and so on; L/C is welcome.

Shenzhen Sanyi Technology Co., Ltd. has been awarded the

At the end of 2017, the factory was relocated to the fifth building of Yingfeng Industrial Park, Huiyang Economic Development Zone, Huizhou City, Guangdong Province. The plant area has been expanded to 5,000 square meters, greatly improving production efficiency!

A: 1 pc per item is available.

At the end of 2017, the factory was relocated to the fifth building of Yingfeng Industrial Park, Huiyang Economic Development Zone, Huizhou City, Guangdong Province. The plant area has been expanded to 5,000 square meters, greatly improving production efficiency!

A: Yes,we promise 3 years warranty for all our products.

A: Yes, we offer samples for testing with cost paid by buyer. Besides we welcome our customers to take sample as we believe seeing is believing.