ShIP to

Home  > Top PRODUCT Wholesale  > Customized LED Power Supply  >  metal led light power supply power box for driver
metal led light power supply power box for driver

metal led light power supply power box for driver

1pcs(small quantity is acceptable)
Place of Origin
Shenzhen, China
Payment Terms
L/C, T/T, Westernunion, Paypal, Cash
Delivery Time
7-30 working days depends on quantity
OEM/ODM Availability
3 years
Start Port

LED Power Supply

SFY-I series

This Rainproof Power Supply Box DC power can use to the LED Lighting, and illuminator; Automatic Overload cut-off;  Short circuit and Over Voltage protection; Low Interference & Noise.

Product Display

OutputDC Voltage5V9V12V15V24V48V
Rated Current20A12A10A8A5A2.5A
Current Range0~20A0~12A0~10A0~8A0~5A0~2.5A
Rated Power100W108W120W120W120W120W
Ripple & Noise Max(Note2)120mVp-p120mVp-p120mVp-p120mVp-p120mVp-p120mVp-p
Voltage Adj. Range±10%±10%±10%±10%±10%±10%
Voltage Tolerance(Note 3)±7%±7%±6%±5%±5%±5%
Line Regulation(Note 4)±0.5%±0.5%±1%±1%±1%±1%
Load Regulation(Note 5)±2.0%±1.0%±1.0%±1.0%±1.0%±1.0%
Setup/Rise Time500ms, 30ms/220Vac (Full load)
Hold up time(Typ.)100ms/220Vac (Full load)
InputVoltage Range100~240Vac
Frequency Range50/60Hz
Ac Current(Typ.)1.8A/220Vac
Inrush Current(Typ.)Cold Start: 50A/220Vac
Leakage Current(Typ.)3.5mA
ProtectionOver load protection110%~135%
Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage protection115%~150%
Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over-temperature protectionProtected Mode: crystal internal contact temperature exceeds 140 ℃, turn off the output, when the temperature returns to normal automatic recovery
EnvironmentWorking Temp-10℃~60℃(Refer to "derating curve ")
Working Humidity20~90%RH, non-condensing
Storage Temp, Humidity30℃~75℃  10~98%RH, non-condensing
Temp Coefficient±0.03% ℃(0~50℃)(+5V)
Vibration10Min/1 cycle, period for 60min,each along X,Y,Z axes
Safety & EMC
(Note 7)
Safety Standards Note 6GB4943, EN60950
Withstand VoltageI/P-O/P: 3KVAC   I/P-FG: 1.5KVAC O/P-FG: 1.5KVAC
Isolation ResistanceI/P-O/P I/P-FG O/P-FG:100M Ohms/500VDC/25℃/70%RH
EMI Conduction RadiationCompliance to: EN55022, EN61000-3-2,3. FCC part15,GB9254 class B,GB17625.1
EMS ImmunityCompliance to: EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A
Dimension/Packing106*226*62mm(L*W*H) 1.2KG;15pcs/18Kg
Note1.All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25℃ of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor
3.Tolerance: includes set up tolerance, line regulation and load regulation
4.Line regulation is measured from low line to high line at rated load.
5.Load regulation measurement: from 0% to rated load of 100%
6.In accordance with the requirements of GB4943.1 power applies only to an altitude of 2000 meters in the following areas and non-tropical climate conditions for safe use
7.The power supply is considered part of the system components, to be with terminal equipment related to electromagnetic compatibility Relevant confirmation.

Chat Online 编辑模式下无法使用
Chat Online inputting...