APJC-15W |
Model | AD-S0530B | AD-S07520B | AD-S0915B | AD-S1212B | AD-S1510B | AD-S1810B | AD-S2405B |
Output | DC Voltage | 5V | 7.5V | 9V | 12V | 15V | 18V | 24V |
Rated Current | 3A | 2A | 1.5A | 1.2A | 1A | 1A | 0.5A |
Current Range | 0~3A | 0~2A | 0~1.5A | 0~1.2A | 0~1A | 0~1A | 0~0.5A |
Rated Power | 15W | 15W | 13.5W | 14.4W | 15W | 18W | 12W |
Ripple & Noise Max (Note 2) | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p |
Voltage Tolerance (Note 3) | ±5% | ±5% | ±5% | ±5% | ±3% | ±3% | ±3% |
Line Regulation(Note 4) | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% |
Load Regulation(Note 5) | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% |
Setup/Rise Time | 500ms 200ms 30ms (Full load) 30 |
Input | AC plug | AC Plus-UK | AC Plus-CN | AC Plus-EN | AC Plus-US |
Voltage Range | 100Vac~240Vac |
Frequency Range | 50/60Hz |
Efficiency(Typ.) | 80% | 80% | 85% | 85% | 85% | 85% | 85% |
Current(Typ.) | 0.19A/200Vac |
Inrush Current(Typ.) | 35A/220Vac |
Leakage Current(Typ.) | < 0.35mA/220Vac |
Protection | Over Load | Rated output power: 110%~240% |
Protection type:Hiccup mode,recovers automatically after fault condition is removed |
Over Voltage | Rated output Voltage:115%~135% |
Protection mode: diode clamp |
Over Temp(Note 5) | Crystal internal contact temperature exceeds 140 ℃, start over temperature protection. |
Protection mode: turn off the output voltage, the temperature drops automatically resume |
Environment | Working Temp | -0℃~50℃(Refer to "Derating curve ") |
Working Humidity | 0~90%RH, non-condensing |
Storage Temp/Humidity | -10℃~75℃ 10~98%RH, non-condensing |
Temp. Coefficient | ±0.03%/℃(0~50℃) |
Vibration | 10Min/1 cycle,period for 60min,each along X,Y,Z axes |
Safety & EMC Note 7 | Safety Standards | GB4943,EN60950 |
Withstand Voltage | I/P-O/P:2KVac |
Isolation Resistance | I/P-O/P:100M Ohms/500VDC/25℃/70%RH |
EMI Conduction Radiation | Compliance to: EN55022, EN61000-3-2,3, FCC part15,GB9254 class B,GB17625.1 |
EMS Immunity | Compliance to: EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A |
Others | Life | 2 years: 100% load, 30, 8 hours / day |
MTBF | ≥1415.6Khrs |
Dimension | 90*47*34mm(L*W*H) |
Packing | 0.08Kg 200pcs/16Kg |
Connector | Plug/Wiring | For second pages, other models can be customized according to customer requirements. |
Note | 1.If no special instructions are specified, all the specifications are measured at the input of 230VAC, the rated load, the ambient temperature of 25℃. 2.Ripple and noise measuring method: using a 12 "twisted pair, at the same time terminal to parallel 0.1uF and 47uF capacitor, in the 20MHZ bandwidth measurement. 3.Curacy: contains setting error, linear adjustment rate and load adjustment rate. 4.Linear adjust rate measurement: at rated load, from a low voltage to a high voltage test. 5.Load adjustment rate measurement method: from 20% to 100% 6.Overtemperature protection is determined by the function of the control IC. |