Related Products
ShIP to
ShIP to
| APM-10W | |||||||||||
| Model | AD-S0520B | AD-S07512B | AD-S0910B | AD-S1208B | AD-S1506B | AD-S1805B | AD-S2405B | ||||
| Output | DC Voltage | 5V | 7.5V | 9V | 12V | 15V | 18V | 24V | |||
| Rated Current | 2A | 1.2A | 1A | 0.8A | 0.6A | 0.5A | 0.5A | ||||
| Current Range | 0～2A | 0～1.2A | 0～1A | 0～0.8A | 0～0.6A | 0～0.5A | 0～0.5A | ||||
| Rated Power | 10W | 9W | 9W | 9.6W | 9W | 9W | 12W | ||||
| Ripple & Noise Max (Note 2) | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | ||||
| Voltage Tolerance (Note 3) | ±5% | ±5% | ±5% | ±5% | ±3% | ±3% | ±3% | ||||
| Line Regulation(Note 4) | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ||||
| Load Regulation(Note 5) | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | ||||
| Setup/Rise Time | 500ms 200ms 30ms (Full load) 30 | ||||||||||
| Input | AC plug | AC-UK | AC-CN | AC-EN | AC-US | ||||||
| Voltage Range | 100Vac～240Vac | ||||||||||
| Frequency Range | 50/60Hz | ||||||||||
| Efficiency(Typ.) | 80% | 80% | 85% | 85% | 85% | 85% | 85% | ||||
| Current(Typ.) | 0.12A/200Vac | ||||||||||
| Inrush Current(Typ.) | 35A/220Vac | ||||||||||
| Leakage Current(Typ.) | < 0.35mA/220Vac | ||||||||||
| Protection | Over Load | Rated output power: 110%～240% | |||||||||
| Protection type：Hiccup mode,recovers automatically after fault condition is removed | |||||||||||
| Over Voltage | Rated output Voltage:115%～135% | ||||||||||
| Protection mode: diode clamp | |||||||||||
| Over Temp(Note 5) | Crystal internal contact temperature exceeds 140 ℃, start over temperature protection. | ||||||||||
| Protection mode: turn off the output voltage, the temperature drops automatically resume | |||||||||||
| Environment | Working Temp | -0℃～50℃(Refer to "Derating curve ") | |||||||||
| Working Humidity | 0～90%RH, non-condensing | ||||||||||
| Storage Temp/Humidity | -10℃～75℃ 10～98%RH, non-condensing | ||||||||||
| Temp. Coefficient | ±0.03%/℃(0～50℃) | ||||||||||
| Vibration | 10Min/1 cycle,period for 60min,each along X,Y,Z axes | ||||||||||
| Safety & EMC Note 7 | Safety Standards | GB4943,EN60950 | |||||||||
| Withstand Voltage | I/P-O/P:2KVac | ||||||||||
| Isolation Resistance | I/P-O/P:100M Ohms/500VDC/25℃/70%RH | ||||||||||
| EMI Conduction Radiation | Compliance to: EN55022, EN61000-3-2,3, FCC part15,GB9254 class B,GB17625.1 | ||||||||||
| EMS Immunity | Compliance to: EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A | ||||||||||
| Others | Life | 2 years: 100% load, 30, 8 hours / day | |||||||||
| MTBF | ≥1415.6Khrs | ||||||||||
| Dimension | 74*28*42mm(L*W*H) | ||||||||||
| Packing | 0.07Kg 100pcs/7Kg | ||||||||||
| Connector | Plug/Wiring | For second pages, other models can be customized according to customer requirements. | |||||||||
| Note | 1.If no special instructions are specified, all the specifications are measured at the input of 230VAC, the rated load, the ambient temperature of 25℃. 2.Ripple and noise measuring method: using a 12 "twisted pair, at the same time terminal to parallel 0.1uF and 47uF capacitor, in the 20MHZ bandwidth measurement. 3.Curacy: contains setting error, linear adjustment rate and load adjustment rate. 4.Linear adjust rate measurement: at rated load, from a low voltage to a high voltage test. 5.Load adjustment rate measurement method: from 20% to 100% 6.Overtemperature protection is determined by the function of the control IC. | ||||||||||
| APM-12W | ||||||||
| Model | AD-S0520B | AD-S07515B | AD-S0912B | AD-S1208B | AD-S1510B | AD-S1805B | AD-S2405B | |
| Output | DC Voltage | 5V | 7.5V | 9V | 12V | 15V | 18V | 24V |
| Rated Current | 2A | 1.5A | 1.2A | 0.8A | 1A | 0.5A | 0.5A | |
| Current Range | 0～2A | 0～1.5A | 0～1.2A | 0～0.8A | 0～1A | 0～0.5A | 0～0.5A | |
| Rated Power | 10W | 11.25W | 10.8W | 12W | 15W | 9W | 12W | |
| Ripple & Noise Max (Note 2) | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | |
| Voltage Tolerance (Note 3) | ±5% | ±5% | ±5% | ±5% | ±3% | ±3% | ±3% | |
| Line Regulation(Note 4) | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | |
| Load Regulation(Note 5) | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | |
| Setup/Rise Time | 500ms 200ms 30ms (Full load) 30 | |||||||
| APM-15W | ||||||||
| Model | AD-S0520B | AD-S07520B | AD-S0915B | AD-S1212B | AD-S1510B | AD-S1810B | AD-S2405B | |
| Output | DC Voltage | 5V | 7.5V | 9V | 12V | 15V | 18V | 24V |
| Rated Current | 2A | 2A | 1.5A | 1.2A | 1A | 1A | 0.5A | |
| Current Range | 0～2A | 0～2A | 0～1.5A | 0～1.2A | 0～1A | 0～1A | 0～0.5A | |
| Rated Power | 10W | 15W | 13.5W | 14.4W | 15W | 18W | 12W | |
| Ripple & Noise Max (Note 2) | 100mVp-p | 100mVp-p | 100mVp-p | 120mVp-p | 150mVp-p | 180mVp-p | 200mVp-p | |
| Voltage Tolerance (Note 3) | ±5% | ±5% | ±5% | ±5% | ±3% | ±3% | ±3% | |
| Line Regulation(Note 4) | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | |
| Load Regulation(Note 5) | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | |
| Setup/Rise Time | 500ms 200ms 30ms (Full load) 30 | |||||||
| APM-18W | ||||||||
| Model | AD-S0520B | AD-S07520B | AD-S0920B | AD-S1215B | AD-S1512B | AD-S1810B | AD-S2405B | |
| Output | DC Voltage | 5V | 7.5V | 9V | 12V | 15V | 18V | 24V |
| Rated Current | 2A | 2A | 2A | 1.5A | 1.2A | 1A | 0.5A | |
| Current Range | 0～2A | 0～2A | 0～2A | 0～1.5A | 0～1.2A | 0～1A | 0～0.5A | |
| Rated Power | 10W | 15W | 18W | 18W | 18W | 9W | 12W | |
| Ripple & Noise Max (Note 2) | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | |
| Voltage Tolerance (Note 3) | ±5% | ±5% | ±5% | ±5% | ±3% | ±3% | ±3% | |
| Line Regulation(Note 4) | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | |
| Load Regulation(Note 5) | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | |
| Setup/Rise Time | 500ms 200ms 30ms (Full load) | |||||||
| APM-24W | ||||||||
| Model | AD-S0520B | AD-S07520B | AD-S0920B | AD-S1220B | AD-S1515B | AD-S1812B | AD-S2410B | |
| Output | DC Voltage | 5V | 7.5V | 9V | 12V | 15V | 18V | 24V |
| Rated Current | 2A | 2A | 2A | 2A | 1.5A | 1.2A | 1A | |
| Current Range | 0～2A | 0～2A | 0～2A | 0～2A | 0～1.5A | 0～1.2A | 0～1A | |
| Rated Power | 10W | 15W | 18W | 24W | 22.5W | 21.6W | 24W | |
| Ripple & Noise Max (Note 2) | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | |
| Voltage Tolerance (Note 3) | ±5% | ±5% | ±5% | ±5% | ±3% | ±3% | ±3% | |
| Line Regulation(Note 4) | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | Shenzhen Sanyi Technology Co., LTD adopts superior raw material which comes form ac power pack. It is less prone to have scale build-up after long-term use
The raw material of Sanyi ac power pack meets the requirements of overseas technology. Produced with ductile iron material, it provides high strength
Sanyi draws inspiration from history to create ac power pack. It delivers excellent resistance to different types of oils and grease
Lots of time and money are spent upfront perfecting Sanyi Power Adapter. It has great resistance to stress corrosion cracking
The design of ac power pack has something of significance for the further development of Sanyi. Its design cuts down the damage of cavitation
Professional quality management personnel, ensure the product 100% quality. It is used extensively in the automation, oil & gas industries
The product performance is fine, the quality is stable and reliable. It is commonly found in waste-water management systems and in manufacturing
Under the supervision of professional quality inspectors, the products are inspected at every stage of production to ensure the superior quality of the products. It meets the demands of working under a wide of pressure and temperature conditions
Due to our strict quality control system, the quality of our products is guaranteed. Its ability to keep pressure stability avoids vibration and noise
We specialize in researching and developing new technologies to bring the quality and performance of our products to the forefront of the industry. It will go through initial debugging tests before delivery for guaranteed quality
Advanced testing equipment and perfect quality assurance system ensure the high quality of products. It is made to be durable even in the toughest pipeline environments
This product will prevent the unpleasant feeling of waking up in the middle of the night in a puddle of sweat. The solid metal construction ensures its long service life
Being distinctive, it increases the curiosity to explore and discover. Its design will resonate with a unique category of consumers. The solid metal construction ensures its long service life
In addition to protecting the customer's high-quality sleep, this product also adds an instant color matching and pattern design to the bed, changing the appearance of the room. The particles in the fluid are not prone to stick to it due to its internal sheathing
This product is meant to be something practical that you have in a room thanks to its ease of use and comfort. It will go through initial debugging tests before delivery for guaranteed quality
The product offers protection of persons against injury as a result of contact with live parts; it has thus managed to dramatically lower the number of accidents, if not fires. It is made to be durable even in the toughest pipeline environments
This kind of product with high-quality is flexible and can be adjusted in accordance with the wearer's face and can be used for a long time. It is not prone to cause eddy flow and turbulent flow
Product Message
Shenzhen Sanyi Technology Co., Ltd.has been focusing on R&D, production, sales and service of system integrated power solutions for 16 years. Copyright © 2019Shenzhen Sanyi Technology Co., Ltd. | All Rights Reserved 
Chat Online
编辑模式下无法使用
Chat Online
inputting...
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly. | |
