monitor power supply | CCTV Power Supply

Product Display

Product Specification

Model		SY-A9/12
Output	DC Voltage	12V		12V		12V
	Rated Current	1A		2A		3A
	Current Range	0～1A		0～2A		0～3A
	Rated Power	12W		24W		36W
	Ripple & Noise Max Note 3	80mVp-p		80mVp-p		80mVp-p
	Voltage Tolerance Note 3	±5%		±5%		±5%
	Line Regulation（Note 4）	±1%		±1%		±1%
	Load Regulation（Note 5）	±2%		±2%		±2%
	Setup, Rise Time	500ms 200ms 30ms (Full load)30
Input	AC plug	AC Plug-UK	AC Plug-CN		AC Plug-EN		AC Plug-US
	Voltage Range	100Vac～240Vac110VAC～240AVC,130VDC～370ADC
	Frequency Range	50/60Hz
	Efficiency（Typ.）	85%		86%		86%
	Ac Current（Typ.）	0.38A/200Vac
	Inrush Current（Typ.）	35A/220Vac
	Leakage Current（Typ.）	<0.35mA/220Vac
Protection	Over Load	Rated output power: 110%～240%
		Protection type: Hiccup mode, recovers automatically after fault condition is removed
	Over Voltage	Rated output Voltage:115%～135%
		Protection mode: diode clamp
	Over Temp（Note 5）	Crystal internal contact temperature exceeds 140 ℃, start over temperature protection.
		Protection mode: turn off the output voltage, the temperature drops automatically resume
Environment	Working Temp	-0℃～50℃(Refer to "Derating curve ")
	Working Humidity	0～90%RH, non-condensing
	Storage Temp/Humidity	-10℃～75℃ 10～98%RH, non-condensing
	Temp. Coefficient	±0.03%/℃（0～50℃）
	Vibration	10Min/1 cycle, period for 60min,each along X,Y,Z axes
Safety & EMC Note 7	Safety Standards	GB4943, EN60950
	Withstand Voltage	I/P-O/P: 2KVac
	Isolation Resistance	I/P-O/P: 100M Ohms/500VDC/25℃/70%RH
	EMI Conduction Radiation	Compliance to: EN55022, EN61000-3-2,3, FCC part15,GB9254 class B,GB17625.1
	EMS Immunity	Compliance to: EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A
Others	Life	2 years: 100% load, 30, 8 hours / day
	MTBF	≥1415.6Khrs
	Dimension	1547842mm(LWH)
	Packing	0.2Kg 100pcs/20Kg
Connector	Plug/Wiring	For second pages, other models can be customized according to customer requirements.
Note	1.If no special instructions are specified, all the specifications are measured at the input of 230VAC, the rated load, the ambient temperature of 25℃. 2.Ripple and noise measuring method: using a 12" twisted pair, at the same time terminal to parallel 0.1uF and 47uF capacitor, in the 20MHZ bandwidth measurement. 3.Curacy: contains setting error, linear adjustment rate and load adjustment rate. 4.Linear adjust rate measurement: at rated load, from a low voltage to a high voltage test. 5.Load adjustment rate measurement method: from 20% to 100% 6.Overtemperature protection is determined by the function of the control IC.

Model		SY-A9/24
Output	DC Voltage	24V		24V
	Rated Current	1A		2A
	Current Range	0～1A		0～2A
	Rated Power	24W		48W
	Ripple & Noise Max Note 3	80mVp-p		80mVp-p
	Voltage Tolerance Note 3	±5%		±5%
	Line Regulation(Note 4)	±1%		±1%
	Load Regulation(Note 5)	±2%		±2%
	Setup/Rise Time	500ms 200ms 30ms (Full load) 30
Input	AC plug	AC Plug-UK	AC Plug-CN	AC Plug-EN	AC Plug-US
	Voltage Range	100Vac～240Vac 110VAC～240AVC,130VDC～370ADC
	Frequency Range	50/60Hz
	Efficiency(Typ.)	85%		86%
	Ac Current(Typ.)	0.4A/200Vac
	Inrush Current(Typ.)	35A/220Vac
	Leakage Current(Typ.)	<0.35mA/220Vac