EPS Switching power supply
EPS Switching power supply
EPS-4308 is the full range AC input emergency power supply,bulit-in EMI filter,with constant current constant voltage trickle charging,seamless transformation of power failure.
|Ripple & Noise Max(Note2)||120mVp-p||/||120mVp-p||/|
|Voltage Adj. Range||±10%||/||±10%||/|
|Voltage Tolerance(Note 3)||±5%||/||±5%||/|
|Line Regulation(Note 4)||±0.5%||/||±0.5%||/|
|Load Regulation(Note 5)||±1.0%||/||±1.0%||/|
|Setup/Rise Time||500ms,50ms/220Vac (Full load)|
|Hold up time(Typ.)||50ms/220Vac (Full load)|
|Protection||Over Load protection||105%～150%|
|Over Voltage protection||Protection type: Hiccup mode,recovers automatically after fault condition is removed|
|Over Shoot protection||Protection type: Hiccup mode,recovers automatically after fault condition is removed|
|Protection mode: the device up mode, after removing the abnormal conditions can be automatically restored|
|Features||Features Introduction||Battery floating long-line, high charging efficiency, battery saturation can be up to 90%|
|Stoped to prevent overcharging, effectively extending the battery life|
|Mains / battery automatic switchover time is very short, without staff on duty|
|Can directly start the UPS batteries to meet emergency needs of users|
|Working Humidity||20～90%RH, non-condensing|
|Storage Temp/Humidity||-20℃～75℃ 10～98%RH, non-condensing|
|Vibration||10Min/1 cycle,period for 60min,each along X,Y,Z axes|
|Safety & EMC(Note 7)||Safety Standards(Note 6)||GB4943,EN60950|
|Withstand Voltage||I/P-O/P: 2.5KVAC I/P-FG: 1.5KVAC O/P-SFG: 1.5KVAC|
|Isolation Resistance||I/P-O/P I/P-FG O/P-FG: 100M Ohms/500VDC/25℃/70%RH|
|EMI Conduction Radiation||Compliance to: EN55022, EN61000-3-2,3, FCC part15,GB9254 class B,GB17625.1|
|EMS Immunity||Compliance to: EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A|
|Note||1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. |
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.Line regulation is measured from low line to high line at rated load.
5.Load regulation measurement: from 0% to rated load of 100%
6.In accordance with the requirements of GB4943.1 power applies only to an altitude of 2000 meters in the following areas and non-tropical climate conditions for Safe use.
7.The power supply is considered part of the system components, to be with terminal equipment related to electromagnetic compatibility Relevant confirmation..
Ask for free custom survice now!
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.