SJ-300W-Ultra-thin | |||||||
MODEL | AD-S05600AA | ||||||
Output | DC Voltage | 5V | |||||
Rated Current | 60A | ||||||
Current Range | 0~60A | ||||||
Rated Power | 300W | ||||||
Ripple & Noise Max(Note2) | 100mVp-p | ||||||
Voltage Adj. Range | ±10% | ||||||
Voltage Tolerance(Note 3) | ±7% | ||||||
Line Regulation(Note 4) | ±0.5% | ||||||
Load Regulation(Note 5) | ±2.0% | ||||||
Setup/Rise Time | 500ms,30ms/230VAC 1200ms,30ms/180VAC (Full load) | ||||||
Hold up time(Typ.) | 60ms/230VAC 14ms/180VAC(Full load) | ||||||
Input | Voltage Range | 180~240VAC | |||||
Frequency Range | 50/60Hz | ||||||
Efficiency(Typ.) | 80% | ||||||
Ac Current(Typ.) | 9.09A/180VAC 4.5A/220VAC | ||||||
Inrush Current(Typ.) | Cold Start: 42A/240VAC | ||||||
Leakage Current(Typ.) | < 2mA/240VAC | ||||||
Protection | Over load protection | 105%~150% | |||||
Protection type: Hiccup mode,recovers automatically after fault condition is removed | |||||||
Over Voltage protection | 115%~150% | ||||||
Protection type: Hiccup mode,recovers automatically after fault condition is removed | |||||||
Over-temperature protection | Protected Mode: crystal internal contact temperature exceeds 140 ℃, turn off the output, when the temperature returns to normal automatic recovery | ||||||
Environment | Working Temp | -10℃~60℃(Refer to "derating curve ") | |||||
Working Humidity | 20~90%RH, non-condensing | ||||||
Storage Temp/Humidity | -30℃~75℃ 10~98%RH, non-condensing | ||||||
Temp Coefficient | ±0.03% ℃(0~50℃)(+5V) | ||||||
Vibration | 10Min/1 cycle,period for 60min,each along X,Y,Z axes | ||||||
Safety & EMC (Note 7) | Safety Standards Note 6 | GB4943, EN60950 | |||||
Withstand Voltage | I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 1.5KVAC | ||||||
Isolation Resistance | I/P-O/P I/P-FG O/P-FG: 100M Ohms/500VDC/25℃/70%RH | ||||||
EMI Conduction Radiation | Compliance to: EN55022, EN61000-3-2,3. FCC part15, GB9254 class B, GB17625.1 | ||||||
EMS Immunity | Compliance to: EN61000-4-2,3,4,5,6,8,11,light industry level, criteria A | ||||||
Others | MBTF | ≥100000h. | |||||
DimensionPacking | 215*115*30mm(L*W*H) /1KG;24pcs/24Kg | ||||||
Note | 1.All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25℃ of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.Line regulation is measured from low line to high line at rated load. 5.Load regulation measurement: from 0% to rated load of 100%. 6.In accordance with the requirements of GB4943.1 power applies only to an altitude of 2000 meters in the following areas and non-tropical climate conditions for safe use. 7.The power supply is considered part of the system components, to be with terminal equipment related to electromagnetic compatibility Relevant confirmation. |
KXN-3005D DC Power Supply DC adjustable power switching power supply 300V/5A
item condition: New
Response and high accuracy when compared with linear power supply.
Output voltage and output current between 0 to rated value is continuously adjustable.
Constant voltage and constant current can automatic conversion.
Overload and reverse polarity protection keep power supply and its loads safe from unexpected conditions.
LED digital display output voltage and output current
Cooling fan is connected with temperature sensor. Its can reduce the fan speed automatically when the internal temperature or load decreases to prevent the additional noise.
Caution:
Please choose the right input voltage on the back of DC power supply.
Incorrect choosing input voltage will damage the machine.
1. How could I buy products if there is no price on the website?
Buyers need to send required product details via e-mail. Then a reasonable quotation as request would be provided.
2. How long could I get reply of my enquiry?
Buyers will get a reply within 12 hours. China working hours 9:30-18:30 Monday-Friday online service to help buyers solving problem..
3. How is the after sales service?
Buyers updated market information regularly.
4. How about the Quality?
We have the best professional and experienced engineer and strict QA and QC syste.Repair rate under 0.1%-0.2%.
5. Which courier company do you use?
We use EMS, DHL, UPS, DPEX etc. Buyer can choose the desired shipping method when ordering.
6. I haven’t received my goods yet some days later after my payment.
You can check the logistics status by the tracking number we informed you in the email or in your account on the above website of express company to see where the parcel is, or you can contact us.
Copyright © 2019Shenzhen Sanyi Technology Co., Ltd. | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.